Safety question

 Safety interview Question & Answer

1. What is Safety ?

It is a condition which gives you freedom from hazard, risk, accident which may cause injury, damage and loss to material or property damage and even death.

2. What is accident ?

It is an unexpected or unplanned event which may or may not result in injury or damage or property loss or death.

3. What is injury ?

It is defined as a harmful condition sustained by the body as a result of an accident.
4. What is hazard ?
Inherent property of a substance or an occurrence which has potential to cause loss or damage property, person or environment.
5. What is risk ?
In probability of the realization of potential for loss or damage or injury.
6. What is incident?
It is an event which represents deviation from the intended sequence of designed steps.
7. What is safety policy?
Any company has a social and legal obligation to provide a safe and health working environment to all his improvement to all his employees.
8. What is safety audit?
The safety audit is the process that identifies un-safe conditions and unsafe acts the plant and recommended safety improvement.
Walk through It evaluates the unsafe condition notice able to naked eye during work through the plant. ( Stores, civil work, erection work)
Inter mediate-more details study and review of plant design and plant operation.
Comprehensive –It evaluates the safety factors in the plant on the base engineering, analysis, testing, measurement.
9. What is safety tag?
Safety tag can be defined a surface made of card board or paper board on which English local languages letters written for warning safety instructions to employees.
10. What is safety programme?
Safety programme can be defined as five methods by which accident can be prevent easily they are engineering, education, enforcement, enthusiasm and example safety programmes are plain spoken and carry out certain legal steps.
11. What is attitude?
Attitude may be described as continuous behavior . if man’s behavior is good, then his action will be either correct or safe.
12. what is emergency planning?
Emergency planning can defined as a control measurer. It can control the accidents safe guard people and provide information to media.
Safety question  13. What is work permit system?
Work permit system is a “ written documents” for permission to undertake a job by area in charge or it is written document issued by the area in charge to the performer to under take the specific job.
14. What is work at height?
Any work above 2 meters from ground is caused work at height.
15. What is confined space?
An area which is small and enclosed or an area where one entry and exits or where a man cannot work comfortable in any location is caused confined space.
Safety question 
16. What is excavation?
Marking a hole or tunnel by digging the ground by man or machine is called excavation.
Safety question 


  

                   For more Question 

                17 to 35

         1  2  3  4  5  6  7  8  9  Next