Safety Quiz

Prepartion for safety job interveiw

36. What are the precaution for “painting”?

1. All flammable material should be cleared from the work area
2. The required protective clothing and equipment must be worn
3. Cartridge respirators shall always be worn
4. Adequate ventilation is necessary
5. Adequate washing facilities must be readily available
6. Barrier cream should be applied to the skin
37. What are the hazards in welding?
Eye injury
Burn injury Arc realization
Electrical shock Light arc radiation
Heat, light and radiation effect Heat fume
Poisonous gases Chipped price of weld metal
Fire
Explosion Scattering
Noise Sparking
Sparking
Flying sand
Safety Quiz 

38. What are hazards and injuries in manual handing?

1. Cutting fingers due to sharp edges
2. Burns due to handing of hot articles
3. Foot injuries due to dropped articles
4. Slipped disc due to improper posture in lifting on object
5. Strains to wrist or fingers
6. Sprains, wounds hernias, fractures
39. Cause of accidents in manual handling?
1. Improper lifting
2. Carrying too heavy loads
3. Improper gripping
4. Failure to use PPE
5. Lifting greasy, oily and irregular objects
6. Poor physique
Safety Quiz 

40. What precautions are need to avoid accident in manhandling?

1. Stand at safe distance from the load
2. Sharp edge and burns are removed before lifting a material.
3. PPE such as safety gloves and safety shoes are to be used.
4. If the weight is too heavy for one person to lift, then he has to seek the assistance.
5. The pathway is not blocked by obstacles while carrying the load.
6. The different actions, movements and forces necessary while carrying the load.
7. Modify the task by using hooks and crow bars.
8. Mechanical equipments like cranes shall be used.
9. Modify the objects
10. Change the way things are used.
Safety Quiz 
41. Tips for manuals handling?
1. Plan
2. Clear the path
3. Move in close to the load
4. Secure your grip
5. Hold your head upright
6. Maintain normal curves of the spine
7. Power the lift with legs and body weight
8. Don’t twist
42 Cause of accidents in mechanical handling?
1. The sudden failure of wire rope or a chain
2. Slipping of the load from the sling
3. Swinging of the load at the time of lifting
4. The load sometimes hits the man
43. What are the accidents in “poor house keeping”?
1. Men getting hit by failing from overhead
2. Men slipping as greasy, wet or dirty floor
3. Men failing in open tank without cover in level floor
4. Accidents due to poor lighting
5. Fire accidents due to faulty electrical wires
44. What are the advantages in good house keeping?
1. It helps in the reduction of accidents including fire accidents
2. It saves the property damages
3. It improves employee moral
4. Better productivity
5. Working area be-comes presentable
6. Human energy is conserved
7. Visitors are very much satisfied
8. The burden of supervisor is reduced
45. How to care and maintenance of hand tools?
1. Tools must be kept clean and free from corrosion
2. Keep metal parts lightly oiled
3. Remove burrs from edges of tools and heads of chisels.
4. Tools which are not in used must be stored separately
5. A good worker regularly inspects his tools
6. Do not use tools without handles
46. How to prevent accidents of “power tools”?
1. The operators should wear face shields or safety glasses
2. Power tools should be placed in the store room after use
3. power tools should have protected by guards
4. Pneumatic hoses or electric cables of power tools should not pass through passage ways.
5. The electrical power tools should be properly earthed
6. Never horse play with hose of pneumatic tools
7. Power tools machines should be maintained and operated properly.
Safety Quiz 
47. What are the causes of accidents of “hard tools”?
1. Due to wrong way using of tools.
2. Due to defective condition of tools
3. Due to failure of using right tools for right job
4. Due to wrong way of carrying tools
5. Due to strong of tools un safety
48 What precautions are necessary in electrical work?
1. All electrical installations shall be as per Indian electricity rules
2. Only competent persons should handle the electrical equipments
3. The equipments should be earthed properly
4. All temporary electric lines should be drawn at least above man’s height
5. Cable should be completely insulted
6. Cable should not have any joints
7. Only connection for one point
8. Good house keeping on the area
9. Fire protection equipment to be kept near by
10. Use rubber gloves and rubber boots
11. Use good quality of wire
12. Power isolation close to the job
13. Use three pin plug instead of loose wire
14. Never operate any electrical equipment with wet hands
15. Never stand wet surface while working electrical equipments
16. During thunder storm do not stand under tree
17. Proper sign board is necessary
18. No person shall work on any live electrical conductor
19. The switch shall only be put on by person who switched it off
49. What are the hazards in construction?
1. Fall of person from top and getting injured
2. Fall of objects from top and below person injury
3. Fall of materials from top and damaged
4. Person fall into excavated pit
5. Collapse of soil and below person get injury or may
6. Damage of UG cables and sewage pipe
7. Collapse of scaffolding and person fall from height, get injury
8. Electrical shock
9. Fire and explosion
10. Burn injury
11. Health and lung problems
12. Snakes bite
13. Poisonous gas
14. Foreign body in eye
50. Cause of accident in construction?
1. Erection equipment failure
2. Falling of persons from height
3. Electrical shocks
4. Improper lighting
5. Non stop working by worker
6. Up safe work methods
7. Collapsing of earth during trench excavation
8. Failure of use safety equipment
9. Working a height without safety belt
51 General safety precautions in construction?
1. Adequate first aid equipment should be kept ready
2. Adequate fire fighting equipment should be available
3. All general electrical rules should be followed
4. suitable lighting arrangements should be necessary at night work
5. Work men at height should be wear safety belts
6. Work men handling cement should be provided with goggles, rubber gloves and rubber boots by nose mask.
7. The moving parts of grinding machines used construction site should be covered with guards
8. The moving parts of grinding machines used construction site should be covered with guards
9. Excavated material should not kept near the excavated
10. Very short duration of work red flags must be hoisted and more duration red banners must be stretched
11. Defective tools should not be used
12. The worker should not carry tools in his hands when climbing a ladder
13. Excavation should be guarded by suitable fencing
52. How to erect scaffolding?
1. It should be erected on levels firm ground
2. It erected by trained / skilled person
3. It is constructed using metal pipes and wooden boards
4. It should be design and constructed from good and sound material
5. Not to be erected on loose earth
6. Clamps should fixed
7. Properly bracing
8. Sole plate is necessary the base of vertical pipe
53. Safety precaution of scaffold?
1. Wooden board not be painted
2. Wooden board should not to any cracks
3. Check for rust in pipes / clamps
4. Clamps should fixed and good quality
5. Boards thickness should be 3.4 cms and no bending
6. The construction must be rigid, properly based
7. Use of good and sound materials
8. The wooden bellies has not joints
9. Vertical poles should not be more than 6 feet
10. Chains, ropes used for the suspension of scaffoldings
11. Never throw any materials from height
12. Use safety harness while working at above 6 feet
13. Properly ties to be arrangement
54 What control measures area necessary in confined space?
1. Enter with air line BA sets
2. Use 24v flame proof hand lamps
3. A hole watch to be kept near man hole
4. Keep fire fighting equipment ready
5. Gas test to be done to check for oxygen level
6. Provide blowers
7. Don’t smoke in confined space
8. Use ropes and harness
9. The spaces clean before entry
10. Use non sparking tools it there is any risk of flammable vapors being present.



For More Question 

                          55 to 68


    Previous 1  2  3  4  5  6  7  8  9  Next